OmniCure R2000 UV Radiometer

Radiometry is an essential technique for measuring light output from a UV curing system in order to maintain a repeatable process. The OmniCure® R2000 UV Radiometer can be combined with the OmniCure S2000 Spot UV Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the R2000 also allow for the connection of custom sensors that measure light energy directly at the cure site or within cure ring bonding fixtures.

The OmniCure R2000 is ready to use with additional custom sensors such as the OmniCure UV Cure Ring and OmniCure UV Cure Site Radiometer: Adaptable with optical accessories providing radiometry directly at the cure site

OmniCure UV Cure Ring Radiometer complements an OmniCure Cure Ring fixture to provide the most accurate form of process control for precision manufacturing. By enabling the output power from the Cure Ring to be measured directly at the cure site, the UV Cure Ring Radiometer ensures an accurate and repeatable bonding process.

OmniCure UV Cure Site Radiometer provides ultimate process control by measuring the output power of a light guide or optical accessory directly at the bonding site. The UV Cure Site Radiometer will show exactly the amount of irradiance at the substrate or joint, allowing users to control their curing process more accurately.

R2000

Wavelength Range

250 nm – 1 µm (with suitable calibration)

Maximum Range

Power: 1 mW – 12 W Irradiance: 5 mW/cm– 60 W/cm2 (with 5 mm Light Guide)

Resolution

Power: 1 mW Irradiance: 5 mW/cm2 (with 5 mm Light Guide)

Accuracy

+/- 5% typical; +/- 10% maximum

Auto-ranging

Power: 1-990 mW; 1.0-12.00 W Irradiance: 5-990 mW/cm2; 1.0-60 W/cm2

Battery

3.6 V Li

Battery Life

2 years, typical (intermittent use)

Functions

Irradiance Measurement, Power Measurement, Automatic Light Guide Detection, Relative Mode, OmniCure Calibration, Store Data Points, External Input, On Button, Auto Off, Calibration Due Message

Certification

CE marked; complies with IEC, Canadian and US Standards, RoHS compliant

Dimensions (L x W x H)

7 1/2” x 4 3/8” x 2” (19.0 cm x 11.1 cm x 5.0 cm)

Weight

1 lb (450 g)

Warranty

1 year

UV Cure Ring Radiometer

Spectral Range 300-600 nm
Calibration Range 320-500 nm
Dynamic Range 83 mW to 2.5 W
Accuracy +/-5% Typical 10% Maximum
Resolution 10 mW
Functions Auto-Power OFF, Hold, Irradiance and Control Panel Software Supported by OmniCure R2000
Certification CE marked, RoHS Compliant

UV Cure Site Radiometer

Spectral Range 300-600 nm
Calibration Range 320-500 nm
Dynamic Range 0.25 W/cm² to 8.5 W/cm²
Accuracy +/-5% Typical 10% Maximum
Resolution 10 m W/cm²
Functions Auto-Power OFF, Hold, Irradiance and Control Panel Software Supported by OmniCure R2000
Certification CE marked, RoHS Compliant

Reviews

There are no reviews yet.

Be the first to review “OmniCure R2000 UV Radiometer”