UVC 5 UV Curing Conveyor System
Dymax UVC-5 Compact Light-Curing Conveyor System with 120-mm Wide Belt
CE Marked – Available in Europe Only
The Dymax UVC-5 Conveyor is designed for curing UV light-curable adhesives, coatings, and inks in a variety of different industries. This conveyor system is ideal for curing smaller parts and can cure materials applied to a variety of substrates including paper, plastic, metal, glass, laminated materials, printed circuit boards, and many others.
The UVC-5 Conveyor is equipped with a 120-mm wide PTFE non-stick coated belt and one UV lamp. The distance between the lamp and the belt can be manually adjusted (between 15-60 mm) as can the belt speed (2-26 m/min). This enables the operator to tailor curing conditions to specific application requirements. The conveyor also features a counter to track hours of operation, an electric control unit located in the transportation device and an air-cooled casing with an aluminum reflector for the bulb.
Máy sấy UV băng tải UVC-5
| Property | Specifications |
|---|---|
| Lowest UVA Intensity¹ | 990 mW/cm² |
| UVA Dose (@ 1 m/min) | 1,800 mJ/cm² |
| Lamp Type | Focused Beam |
| Number of Lamps | One |
| Illuminated Area (one lamp) | Length: 100 mm; width:120 mm |
| Focal Length | 40 mm |
| Belt Material | 5 mm x 5 mm mesh PTFE non-stick coated fiberglass belt |
| Belt Width | 120 mm |
| Belt Speeds | Adjustable 2 to 26 m/minute |
| Electrical Requirements | 230 VAC, 50 Hz, 5.9A (single phase) |
| Overall Dimensions (L x W x H) | 700 mm x 369 mm x 299 mm |
| Load and Unload Length | 90 mm |
| Vertical Clearance | Adjustable from 15 to 60 mm |
| Net Weight | 20 Kg |
| Lead Time (not including shipping) | 2-3 Weeks |
| Bulb | Typical life – 1,000 hours; Warranty – 500 hours |
| Note ¹ | Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer with a new bulb at a distance of 60 mm. |
Features
- Available in Europe Only – CE Marked
- Lowest Intensity 990 mW/cm²
- Controlled and consistent cure times
- High power lamp (Fe 820 or Hg 850 W)
- Adjustable lamp-to-belt distance (15 to 60 mm)
- Dependable, heavy-duty conveyor design with fully shielded lamp enclosures
- 120-mm wide non-stick coating belt with adjustable speed (2-26 m/min. range)
- Two bulb options, Fe or Hg
Be the first to review “UVC 5 UV Curing Conveyor System”
Related products
Reviews
There are no reviews yet.