OmniCure R2000 UV Radiometer
Radiometry is an essential technique for measuring light output from a UV curing system in order to maintain a repeatable process. The OmniCure® R2000 UV Radiometer can be combined with the OmniCure S2000 Spot UV Curing System to provide a complete curing station with unmatched control and repeatability. Special electronics built into the R2000 also allow for the connection of custom sensors that measure light energy directly at the cure site or within cure ring bonding fixtures.
The OmniCure R2000 is ready to use with additional custom sensors such as the OmniCure UV Cure Ring and OmniCure UV Cure Site Radiometer: Adaptable with optical accessories providing radiometry directly at the cure site
OmniCure UV Cure Ring Radiometer complements an OmniCure Cure Ring fixture to provide the most accurate form of process control for precision manufacturing. By enabling the output power from the Cure Ring to be measured directly at the cure site, the UV Cure Ring Radiometer ensures an accurate and repeatable bonding process.
OmniCure UV Cure Site Radiometer provides ultimate process control by measuring the output power of a light guide or optical accessory directly at the bonding site. The UV Cure Site Radiometer will show exactly the amount of irradiance at the substrate or joint, allowing users to control their curing process more accurately.
|
R2000 |
|
|
Wavelength Range |
250 nm – 1 µm (with suitable calibration) |
|
Maximum Range |
Power: 1 mW – 12 W Irradiance: 5 mW/cm2 – 60 W/cm2 (with 5 mm Light Guide) |
|
Resolution |
Power: 1 mW Irradiance: 5 mW/cm2 (with 5 mm Light Guide) |
|
Accuracy |
+/- 5% typical; +/- 10% maximum |
|
Auto-ranging |
Power: 1-990 mW; 1.0-12.00 W Irradiance: 5-990 mW/cm2; 1.0-60 W/cm2 |
|
Battery |
3.6 V Li |
|
Battery Life |
2 years, typical (intermittent use) |
|
Functions |
Irradiance Measurement, Power Measurement, Automatic Light Guide Detection, Relative Mode, OmniCure Calibration, Store Data Points, External Input, On Button, Auto Off, Calibration Due Message |
|
Certification |
CE marked; complies with IEC, Canadian and US Standards, RoHS compliant |
|
Dimensions (L x W x H) |
7 1/2” x 4 3/8” x 2” (19.0 cm x 11.1 cm x 5.0 cm) |
|
Weight |
1 lb (450 g) |
|
Warranty |
1 year |
|
UV Cure Ring Radiometer |
|
| Spectral Range | 300-600 nm |
| Calibration Range | 320-500 nm |
| Dynamic Range | 83 mW to 2.5 W |
| Accuracy | +/-5% Typical 10% Maximum |
| Resolution | 10 mW |
| Functions | Auto-Power OFF, Hold, Irradiance and Control Panel Software Supported by OmniCure R2000 |
| Certification | CE marked, RoHS Compliant |
|
UV Cure Site Radiometer |
|
| Spectral Range | 300-600 nm |
| Calibration Range | 320-500 nm |
| Dynamic Range | 0.25 W/cm² to 8.5 W/cm² |
| Accuracy | +/-5% Typical 10% Maximum |
| Resolution | 10 m W/cm² |
| Functions | Auto-Power OFF, Hold, Irradiance and Control Panel Software Supported by OmniCure R2000 |
| Certification | CE marked, RoHS Compliant |
Reviews
There are no reviews yet.