Dymax UVCS 20 Conveyor with 5000 EC Lamps

Available Globally, Except Europe

Dymax 12 in wide UV Curing Conveyor Systems (UVCS) offer consistent, fast, and safe UV curing. Designed for curing UV curable adhesives, coatings, and inks, these systems can be outfitted with a standard metal halide (longwave) or mercury (shortwave) bulbs.
This UV cure oven does not emit stray UV light and can be outfitted with one, two, or four moderate-intensity 5000-EC UV flood lamps.

Dymax UVCS 20 Conveyor with 5000 EC Lamps

Property Specifications
Maximum UVA Intensity / (320-395 nm)¹ 200 mW/cm²
Maximum UVA Energy / (320-395 nm) @ 5 fpm 1.25 J/cm² (Parts: 39060, 39065, 39080, 39085)
2.5 J/cm² (Parts: 39070, 39075, 39100, 39105)
Line Speed 1 to 32 fpm
Illuminated Width 6 in or 12 in (depending on the number and orientation of the 5000-EC UV lamps)
Voltage Lamp(s) – 90V to 260V | Conveyor – 120V or 220/230V
Vertical Clearance 4 in (Standard) | 6 in (with 2 in riser, Part 39218) | 10 in (with 6 in riser, Part 39280)
Overall Dimensions 50.5 in L x 29.8 in W x 16.4 in H (128 cm x 76 cm x 72 cm)
Bulb Life 2,000+ hours with less than 20% degradation (typical)
¹ Intensity readings vary widely depending on the make and model of the radiometer. These intensities were measured with the ACCU-CAL™ 50 radiometer

Dymax UVCS 20 Conveyor with 5000 EC Lamps

  • Available globally (except Europe)
  • Consistent UV curing process
  • Adjustable lamp-to-belt distance
  • 4 in, 6 in, or 10 in vertical clearance
  • Integral cooling and vacuum hold-down
  • 1 to 32 feet per minute line speed
  • Bench-top conveyor (cart optional)

Reviews

There are no reviews yet.

Be the first to review “Dymax UVCS 20 Conveyor with 5000 EC Lamps”